This will probably do it
Outage Headlamps Config - Low Beam
726-26-02 xxxx-xxxx-x3xx
HID lights have halogen high beam so nothing else should be needed.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Xlt head light put on xls
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 6
- Joined: Sun Jun 16, 2024 7:12 pm
- Location: Victoria
- Model Of Vehicle: RANGER XLS PX3
- Year Of Vehicle: 2020
- Has thanked: 4 times
Because I didn’t realise this error of 2018 headlights not being compatible with 2020 due to HID and I used the lights until they started flickering but then stopped using them to not damage anything, now my last concern is after installing relays and low beam config changes is there a fault to be cleared or reset needed whilst in Forscan? If so before or after program changes The guy I’ve found to help with do this is only learning forscan himself.. blind leading the blind so just trying to cover all bases before taking the leap
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
See PMTimrog wrote: ↑Thu Jun 20, 2024 11:28 pm
Because I didn’t realise this error of 2018 headlights not being compatible with 2020 due to HID and I used the lights until they started flickering but then stopped using them to not damage anything, now my last concern is after installing relays and low beam config changes is there a fault to be cleared or reset needed whilst in Forscan? If so before or after program changes The guy I’ve found to help with do this is only learning forscan himself.. blind leading the blind so just trying to cover all bases before taking the leap![]()
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- New Member
- Posts: 4
- Joined: Sat Jun 22, 2024 6:51 pm
- Location: 2200
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
- Been thanked: 1 time
Hi Saeb, I’ve been reading all your posts and the information you’ve provided. Just wondering if you could show me how to install relays ? I’ve installed some before but I’m having a hard time with the d8s connections on the HID.saeb wrote: ↑Mon Oct 19, 2020 10:15 pm If pre MY20.25 PX3 lights then they are HIDs and will require external relays to operate correctly or risk over loading the BCM which they 100% do.
If MY20.25 lights then they are LED and will plug in and work correctly. Note that DRLs run of the Parker circuit if retrofitted to pre PX3 vehicle unless wired otherwise.
Email: [email protected]
Any help would be appreciated mate thanks
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
See other thread with your last post please.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic