Hi
Changed to raptor still grill i unplugged front camera to change it to other grill ... since then i continually get rear brake assist error ..... checked codes forscan was a heap so cleared them now i just front camera not calibrated error code in forscan ... and rear brake assist error incar ... the front camera does work though
any thoughts on how to fix it or how to recalibrate the front camera ... also cant clear the the front camera error
cheers
Next Gen Wildtrak
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Reverse brake assist
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Camera use AI to self calibrate. The issue will be that the camera is not in the original position so out of spec to manufactures requirements. If out of spec then not even a manual calibration will work and I'm not sure there even is one in Fords Software. I can run the manual routine for it but again if too far out of spec then it will achieve nothing.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- New Member
- Posts: 1
- Joined: Wed Jan 31, 2024 9:43 pm
- Location: Australia
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2023
Recently fitted a Ironman Raid bar to my Ford Everest Next Gen and since then the Reverse Brake assit does not work..
All front and rear sensors work yet it fails to apply the brakes when the rear sensor go off??
Only thing I can tell is the front camera is partly blocked, could that be a problem.
Any help would be great.
Dave
All front and rear sensors work yet it fails to apply the brakes when the rear sensor go off??
Only thing I can tell is the front camera is partly blocked, could that be a problem.
Any help would be great.
Dave
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Because your 360 degree cameras cannot calibrate due to the camera no longer being in the factory location.
It is an aftermarket manufacturer issue and only them addressing their own issues will resolve your issue. Basically learn to live with it.
It is an aftermarket manufacturer issue and only them addressing their own issues will resolve your issue. Basically learn to live with it.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic