I'm send one to Gerry tomorrow further testing. So far it appears to be holding up perfectly.
Test fitted on a Wildtrak the other day without an issue also.
Next will be to work out who would want want, flat or with the extra table on top. If a phone is used it would usually have a swivel mount so flat will probably be the main one.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Prototype Ultragauge or Other Mount
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 48
- Joined: Sun May 21, 2017 11:11 pm
- Location: Illawarra
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2016
- Forscan Dongle Type: ELM327 with switch
- Been thanked: 4 times
Hi Stewart,
Hopefully Gerrys testing will have a positive result.
I am still interested, I will useing it for my Ultra Gauge, I already have the Ultra Gauge vertical mount.
Tony.
Hopefully Gerrys testing will have a positive result.
I am still interested, I will useing it for my Ultra Gauge, I already have the Ultra Gauge vertical mount.
Tony.
Bull bar, winch, uhf and canopy.
-
- Donator
- Posts: 146
- Joined: Sat Jun 23, 2018 11:34 pm
- Location: Perth
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 27 times
- Been thanked: 24 times
Have you tried it on a WildTrak yet? The dash top has the "padded" top with "stitching" that may cause an interference with your mount.
Happy to test-fit if you post one to WA - I'll sent it back when done.
Happy to test-fit if you post one to WA - I'll sent it back when done.
2018 Ranger Wildtrack (Pride Orange)
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Tried it on one a few weekends ago, fits perfect on those also.
Auspost look as through they hit Gerry's test one with a hammer which doesn't help the process.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 39
- Joined: Mon May 22, 2017 7:18 pm
- Location: Macedon Ranges
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
- Been thanked: 2 times
Hi Stewart,
I know the weather in Melbourne has not really warmed up yet but any progress on these yet.
Steve
Sent from my iPad using Tapatalk Pro
I know the weather in Melbourne has not really warmed up yet but any progress on these yet.
Steve
Sent from my iPad using Tapatalk Pro
Steve
2016 PX2 XLT

2016 PX2 XLT
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Few hickups with this.
The positive is I have found it to be solid, even on the hot days.
Getting access to the printers has been a problem in the last part of this year.
I do have a spare sitting here, but trying to get a replacement part and this turned into a nightmare. Even with the help of a member that lives in Germany the manufacturer has still not shipped after 8 weeks and there is now a PayPal dispute to crawl through.
I have to look at making a silicone mould but was hoping to avoid this due to the small amount required.
I have made a note to follow up this week.
The positive is I have found it to be solid, even on the hot days.
Getting access to the printers has been a problem in the last part of this year.
I do have a spare sitting here, but trying to get a replacement part and this turned into a nightmare. Even with the help of a member that lives in Germany the manufacturer has still not shipped after 8 weeks and there is now a PayPal dispute to crawl through.
I have to look at making a silicone mould but was hoping to avoid this due to the small amount required.
I have made a note to follow up this week.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Testing a 50% infill today. There is an issue with this one as the table was not warm enough.
50% infill with a 6 layer external casing will take approx 3.5 hours. Last prototype was only 15%.
50% infill with a 6 layer external casing will take approx 3.5 hours. Last prototype was only 15%.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- MikeK
- Donator
- Posts: 83
- Joined: Fri Oct 26, 2018 10:00 am
- Location: Gernsheim, Germany
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 5 times
- Been thanked: 9 times
Hi Stewart,
If you find a solution that works and is durable, will you consider making a black version for those of us with LHD trucks? My Ultragauge MX arrived yesterday, and there is no suitable place to attach the vertical mount. I like the idea of mounting it next to the A pillar like you show in the first post.
The iDrive I ordered arrived earlier in the week, and it fits nicely to the right of the steering wheel out of sight but still accessible.
If you find a solution that works and is durable, will you consider making a black version for those of us with LHD trucks? My Ultragauge MX arrived yesterday, and there is no suitable place to attach the vertical mount. I like the idea of mounting it next to the A pillar like you show in the first post.
The iDrive I ordered arrived earlier in the week, and it fits nicely to the right of the steering wheel out of sight but still accessible.
2018 Wildtrak 3.2L Auto Supercab 4x4 in Pride Orange
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Definitely Mike, it is quiet easy to print a mirror image.MikeK wrote: ↑Sat Dec 01, 2018 9:30 am Hi Stewart,
If you find a solution that works and is durable, will you consider making a black version for those of us with LHD trucks? My Ultragauge MX arrived yesterday, and there is no suitable place to attach the vertical mount. I like the idea of mounting it next to the A pillar like you show in the first post.
The iDrive I ordered arrived earlier in the week, and it fits nicely to the right of the steering wheel out of sight but still accessible.
We printed 3 last week, 2 moved on the table, so are faulty and the other one also came out with an error due to an issue with the print head.
Being that they can take 3.5 hours to print one and the material wasted, it is tedious and time consuming which leads to frustration. We have upped the thickness on the walls though and I would say they are nearly at a point where they could easily hold 5kg without adverse affects.
Honestly, I want them done tomorrow but can only do what I can do.
I'm hoping you will see your parcel soon, I noticed it sat in US customs for about 4 days!
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- MikeK
- Donator
- Posts: 83
- Joined: Fri Oct 26, 2018 10:00 am
- Location: Gernsheim, Germany
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 5 times
- Been thanked: 9 times
Great! Have you considered outsourcing the 3D printing?
2018 Wildtrak 3.2L Auto Supercab 4x4 in Pride Orange
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Not yet Mike.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Update, I have had some time to play and things are looking very positive. I should have access to 3 x 3d printers shortly to punch a few out. Note they take 7 hours each to print and not everyone is usable. They are 50% honey comb infill and have 4 outer layers. I could pull the infill back but I prefer to go the extra mile.
The Design to suit the Ultragauge is set and there will be another to test for phone mounts soon, although these could shill be used for that.
These will go out as a raw unit as such but can be smoothed with very fine sandpaper 1200 grit plus and polished with a cloth buff. I spent 40 minutes to polish on and make it look beautiful but time is money as such and this will not be done. As a raw unit they still look pretty awesome though and are now printed with UV resistant plastic. The ABS ones were going white from the heat and sun.
I need to work out pricing and how to even package them as although they are strong for there purpose, Auspost drop boxes on them and smash them into pieces.
I will post some pics on the weekend.
The Design to suit the Ultragauge is set and there will be another to test for phone mounts soon, although these could shill be used for that.
These will go out as a raw unit as such but can be smoothed with very fine sandpaper 1200 grit plus and polished with a cloth buff. I spent 40 minutes to polish on and make it look beautiful but time is money as such and this will not be done. As a raw unit they still look pretty awesome though and are now printed with UV resistant plastic. The ABS ones were going white from the heat and sun.
I need to work out pricing and how to even package them as although they are strong for there purpose, Auspost drop boxes on them and smash them into pieces.
I will post some pics on the weekend.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- MikeK
- Donator
- Posts: 83
- Joined: Fri Oct 26, 2018 10:00 am
- Location: Gernsheim, Germany
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 5 times
- Been thanked: 9 times
Great, Stewart! Please don't forget those of us who drive on the other side of the road. 

2018 Wildtrak 3.2L Auto Supercab 4x4 in Pride Orange
-
- Junior Member
- Posts: 40
- Joined: Mon Dec 10, 2018 5:56 am
- Location: Melbourne
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 3 times
Just a suggestion that may be quicker, not necessarily cheaper, cnc machining
http://www.datco.com.au/contact-us/
http://www.datco.com.au/contact-us/
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Thanks mate, starts getting bigger than life but still a good idea. At the end of the day, the quantity is going to be minimal so I will pump 20 out over the next 3 weeks and 1 lhd one for Mike.allover wrote: ↑Fri Mar 22, 2019 2:28 pm Just a suggestion that may be quicker, not necessarily cheaper, cnc machining
http://www.datco.com.au/contact-us/
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Progress, so not far off then I will post some details.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 39
- Joined: Mon May 22, 2017 7:18 pm
- Location: Macedon Ranges
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
- Been thanked: 2 times
Hi Saeb,
You teased us a few weeks ago with the above pictures.
Any progress to report yet?
Steve
Sent from my iPad using Tapatalk Pro
You teased us a few weeks ago with the above pictures.
Any progress to report yet?
Steve
Sent from my iPad using Tapatalk Pro
Steve
2016 PX2 XLT

2016 PX2 XLT
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Nearly ready to go.
Next is some PVC tubing so they can actually be sent without getting smashed by large courier drivers and large boxes. Will be showing some better shots this week and possibly settle on a cost.
Have 19 RH mounts and 4 LH mounts. Probably more than enough I would say.
Next is some PVC tubing so they can actually be sent without getting smashed by large courier drivers and large boxes. Will be showing some better shots this week and possibly settle on a cost.
Have 19 RH mounts and 4 LH mounts. Probably more than enough I would say.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
These are ready to start ordering but please read everything below first.
Couple of images of the brackets to suit Ultragauge or other but was primarly designed around the Ultragauge.
Please DO NOT select express post for this product. Shipping will not start until the 20/05/2019 as I will be encasing them in PVC tube so they do not get damaged on route.
Order
wp/product/ultragauge-bracket-rhd/
wp/product/ultragauge-bracket-lhd/
Couple of images of the brackets to suit Ultragauge or other but was primarly designed around the Ultragauge.
- Printed in ASA which is UV resistant. They are 50% infill with and are 6 layers so very strong.
- These will only be supplied in what I call RAW form and will be as per images 1 and 2.
- They can be smoothed off with emery cloth and polished if you want to take the time to do so, see 3rd and 4th images.
- There are limited LHD, (Left Hand Drive or left hand dash)
- I have no idea when I would do another run.
Please DO NOT select express post for this product. Shipping will not start until the 20/05/2019 as I will be encasing them in PVC tube so they do not get damaged on route.
Order
wp/product/ultragauge-bracket-rhd/
wp/product/ultragauge-bracket-lhd/
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- MikeK
- Donator
- Posts: 83
- Joined: Fri Oct 26, 2018 10:00 am
- Location: Gernsheim, Germany
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 5 times
- Been thanked: 9 times
I received Stewart's bracket for the LHD Ranger and it fits perfectly. Here are some images of it installed in my 2018 Wildtrak (excuse the dust). Click on the images for a larger view.
From the driver's view

Side view showing cable routing

Top view

The bracket snaps firmly in place and the only modification I made was to lightly sand the front surface to create a smooth surface for the adhesive pad on the vertical mount.
From the driver's view

Side view showing cable routing

Top view

The bracket snaps firmly in place and the only modification I made was to lightly sand the front surface to create a smooth surface for the adhesive pad on the vertical mount.
2018 Wildtrak 3.2L Auto Supercab 4x4 in Pride Orange
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Have not tried but seeing a pic of a Ranger with a dash mat the other day, I see no reason why it would not work.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Have not tried but seeing a pic of a Ranger with a dash mat the other day, I see no reason why it would not work.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic