Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
DTE Next Gen
-
- New Member
- Posts: 3
- Joined: Tue Jun 07, 2022 10:30 pm
- Location: Brisbane
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2021
- Forscan Dongle Type: Other
Has anyone had success in getting DTE calculation via Forscan in next Gen (I have an Everest)? Fuel tank size is easy but even with changing fuel level source from pcm to ipc, it just had weird numbers like 1999 then scrolls down to zero.

-
- Junior Member
- Posts: 7
- Joined: Wed Aug 02, 2017 3:10 pm
- Location: Melbourne
- Model Of Vehicle: NEXTGEN EK EVEREST
- Year Of Vehicle: 2022
- Has thanked: 1 time
- Been thanked: 1 time
Did you ever work this one out? I have same issue now after having an ARB Frontier 120L tank installed on my Next Gen Everest Sport. I've updated tank size to 120L, but DTE didn't change and when changing source to IPC, also have the 1999km show up and fuel gauge level drops an extra bar. Have just changed it back PCM for now.
ARB Frontier 120L fuel tank
-
- New Member
- Posts: 3
- Joined: Tue Jun 07, 2022 10:30 pm
- Location: Brisbane
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2021
- Forscan Dongle Type: Other
No luck so far. I'm hearing (from a Ford tech) that you have to take it to Ford and they plug in the tank model no. to pdate (not Forscan). In saying that, they will only do ARB. I got the long ranger, so they won't even do it. You might be in luck with your ARB tank
