Hi new member needing assistance removing annoying door chimes etc

A place to introduce yourself to the community
Post Reply
[email protected]
New Member
New Member
Posts: 1
Joined: Tue Jun 01, 2021 4:01 pm
Location: Mansfield
Model Of Vehicle: RANGER XLT PX3
Year Of Vehicle: 2021
Forscan Dongle Type: ELM327 with switch

Hi guys I have a 2021 XLT Biturbo Ranger, I’m looking for advice on how to remove the door chimes, front wing sensors, seat belt alarms, TPMS when no sensors are available and disabling the smart alternator although I suspect this is already done... I’ve got the Alloy tray and canopy going on Friday so I’ll be relocating the dual battery BCDC setup, fridge and 12v control box etc from the tub once it’s done, Ironman bullbar, stedi Type x pros, 3 sets of wheels and tyres, uhf, phone booster and a few other goodies on it so I’m not far off spending money on it for a while lol, my dongle is a FORScan wifi thing with toggle switch off eBay and I’m new to all this... Hoping it’s simple enough, any help would be greatly appreciated cheers Benny
Hi all, I’m Benny I’ve got a 2021 Ford Ranger XLT with an alloy tray and canopy, bullbar, winch, stedi lights, flares etc etc
User avatar
RossPat
Moderator
Moderator
Posts: 1409
Joined: Wed Apr 04, 2018 9:33 pm
Location: Adelaide
Model Of Vehicle: RANGER XLT PX2
Year Of Vehicle: 2018
Forscan Dongle Type: OBDlink MX Black Bluetooth
Has thanked: 1 time
Been thanked: 19 times

dazzie wrote: Sat Jul 17, 2021 5:55 pm Well that’s a bit disappointing nobody has replied to your post
Once he did the necessary and has forum access there is plenty of info to read
This is a good place to start
https://www.saeb.net/viewtopic.php?f=12&t=2074
2018 XLT PX2 in Winning Blue
Post Reply